Table of Contents
Advertisement
Operating Your Camera
SETUP
1.LENS
2.SHUTTER
Select any function you
3.WHITE BAL.
wish to operate by
4.BACKLIGHT
using the UP and DOWN
5.AGC
buttons.
6.SSNR
7.SENS-UP
8.SPECIAL
9.EXIT
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode
you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Notes
• I f appears at the mode you wish to operate, it means that there is a sub-menu
which can be selected by pressing the SETUP button.
• I f - - - appears at the mode item, it means that there is no mode available to be
selected.
LENS (Adjusting to the brightness level)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to
point to 'LENS' by using the UP and DOWN buttons.
2. Using the SETUP button, you can control the brightness of the screen.
18
COLOR CCD CAMERA
DC
- - -
ATW
Modes can be changed
using the LEFT and
OFF
RIGHT buttons.
NORMAL
LOW
OFF
User's Manual
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
5.AGC
6.SSNR
7.SENS-UP
8.SPECIAL
9.EXIT
3. Please press the SETUP button if you wish to
return to the previous menu.
SHUTTER (condition and speed control)
Because SIR-4150 uses built-in dc lens, shutter speed is fixed at 1/60 basically.
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
- - - - : Shutter speed is fixed at 1/60(1/50)
FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency.
NTSC Model : 1/100, PAL MODEL : 1/120
COLOR CCD CAMERA
DC
- - -
ATW
OFF
NORMAL
LOW
OFF
DC
- - -
ATW
19
User's Manual
Advertisement
Table of Contents
