Features; Assembly - Ryobi YN100A Operator's Manual

12 v inflator
Table of Contents

Advertisement

Available languages

Available languages

PRODUCT SPECIFICATIONS
Motor .................................................................. 12 Volt DC
High Pressure Hose Length ....................................... 20 in.
Cord Length ..................................................................9 ft.
KNOW YOUR INFLATOR
See Figure 1, page 10.
The safe use of this product requires an understanding of
the information on the inflator and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
12 V ADAPTOR
This connector is used to power the inflator using appropri-
ate 12 V DC power sources.
NOTE: The inflator will not function unless connected to a
12 V DC power source.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the items from the box. Make sure that
all items listed in the packing list are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the unit carefully to make sure no damage oc-
curred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

Gauge ............................... Analog (PSI, Kg/CM
Maximum Pressure ......150 PSI, 10.34 BAR, 10.55 Kg/CM
ACCESSORY COMPARTMENT
The inflator features a storage space for accessories.
HIGH PRESSURE AIR HOSE
The high pressure hose can easily inflate items like motor-
cycle, car, and bicycle tires.
ON/OFF SWITCH
Depress the on/off switch on to the on (I) position to power
the inflator on. To turn the inflator off (O), depress the switch
to the off position.
PRESSURE GAUGE
The pressure gauge measures air pressure from 0 to 150 psi.

ASSEMBLY

PACKING LIST
12 Volt Inflator
Inflation Nozzle (2)
Sports Ball Needle
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this inflator or create acces-
sories not recommended for use with this inflator. Any
such alteration or modification is misuse and could re-
sult in a hazardous condition leading to possible serious
personal injury.
7 — English
, and BAR)
2
2

Advertisement

Table of Contents
loading

Table of Contents