Hitachi HOME-1 User's Manual And Operating Manual page 27

Multifunctional Settings (continued)
INPUT Menu (continued)
Item
Select a Noise Reduction Mode:
• This function performs only at a VIDEO input or a S-VIDEO input. At a VIDEO
VIDEO NR
• When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is
• When this function is excessive, it may cause a certain degradation of the
Select the Progressive Mode:
• This function performs only at an interlaced signal of a VIDEO input, a S-
PROGRESSIVE • When the TV or FILM is selected, the screen image will be crisper. But it may
• This function may cause a certain degradation of the picture. In such a case,
Display the Information:
Pressing the
• Use this function when you want the information about the current input (ex.
INFORMATION
Select the S2-ASPECT Mode:
• This function performs only at a S-VIDEO input.
• When the TURN ON is selected, an S2-Video signal can be identified and the
S2-ASPECT
• When the ASPECT button of the remote control is used or the ASPECT item of
Reset the INPUT Menu Items:
Selecting the EXECUTE performs this function.
RESET
• The items of the INPUT menu are collectively returned to the initial setting.
⇔
HIGH MIDDLE
input of NTSC 3.58, this function performs only when the TURN OFF is
selected under the 3D-YCS.
reduced according to each mode.
picture.
⇔
TV FILM
VIDEO input or a COMPONENT VIDEO input of 525i or 625i signal. The FILM
mode is adaptable to the 3-2 Pull-Down system to the conversion.
cause a certain defect (for example, jagged line) of the picture at a quick
moving object. In such a case, please select the TURN OFF, even though the
screen image may lose the crisp.
please select the TURN OFF.
or the ENTER button performs this function.
the resolution and the vertical frequency at a COMPUTER input, the signal
type of a video input) and setting states of the COMPONENT, the VIDEO and
the FLAME LOCK.
TURN ON ⇔
optimum aspect ratio is automatically selected.
the MAIN menu is operated, the S2-ASPECT mode will be switched to the
TURN OFF automatically.
⇒
EXECUTE CANCEL
Note that the INFORMATION item is not reset.
Description
⇔
LOW
⇔
TURN OFF
TURN OFF
27