Picture-2 Menu - Hitachi HOME-1 User's Manual And Operating Manual

Multifunctional Settings (continued)
PICTURE - 2 Menu
With the PICTURE-2 menu, the items shown in the table below can
be performed.
Perform each operation in accordance with the instructions in the
table below.
Item
Adjust the Vertical Position: Up
V POSITION
• This item can be selected only at a COMPUTER input.
Adjust the Horizontal Position: Left
H POSITION
• This item can be selected only at a COMPUTER input.
Adjust the Horizontal Phase (to eliminate flicker) :
H PHASE
• This item can be selected only at a COMPUTER input or a COMPONENT
VIDEO input.
Adjust the Horizontal Size: Large
• When this adjustment is excessive, the picture may not be displayed
H SIZE
correctly. In such a case, please press the RESET button during selection of
this item to reset the H SIZE.
• This item can be selected only at a COMPUTER input.
Adjust the Over-scan Ratio:
• This item can be selected only at a VIDEO input, a S-VIDEO input or a
OVER SCAN
COMPONENT VIDEO input.
• When this adjustment is too large, a certain degradation may appear at the
frame area of the picture. In such a case, please adjust small.
Reset the PICTURE-2 Menu Items:
Selecting the EXECUTE performs this function.
RESET
• The items of the PICTURE-2 menu are collectively returned to the initial
setting. Note that the H PHASE item is not reset.
⇔
Right Left
Large ⇔ Small
⇒
EXECUTE CANCEL
Description
⇔
Down
⇔
Right
⇔
Small
MENU
MAIN V POSITION 20
PICTURE-1 H POSITION 142
PICTURE-2
H PHASE 31
INPUT
H SIZE 1344
AUTO OVER SCAN 95
SCREEN
RESET
OPTION
: SELECT
25