Table of Contents
Advertisement
KNOW YOUR SELF-LEVELING LASER
See Figures 1 - 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AIRGRIP
VACUUM TECHNOLOGY
™
This product uses a vacuum base that can adhere to smooth
surfaces. Using the vacuum seal prevents wall damage
caused by nails or adhesive tape. The vacuum base also
features a 1/4 in. - 20 tripod mount.
ANGLE FINDER
Use the angle finder to dial in the specific angle desired.
CASE
A zippered fabric case stores and protects the laser level
when not in use.
HOOK-AND-LOOP STRAP
The hook-and-loop strap can be used along with the multi-
function base to attach the unit to a variety of irregularly
shaped surfaces.
LASER HEAD
The laser head on your level rotates 180˚ clockwise or coun-
terclockwise to allow for 360˚ of laser line coverage.
LASER LENS
Both laser lens rotate 90˚ to provide for horizontal level lines
or vertical plumb lines.
FEATURES
HOOK-AND-LOOP
STRAP
MULTI-FUNCTION
BASE
LASER POWER / MODE SELECTOR
The laser power/mode selector is used to select one of three
available operating modes — travel mode, self-leveling mode,
or angle-finder mode.
LINE POSITION ADJUSTMENT
THUMBWHEEL
The line position adjustment thumbwheel is used to fine tune
the laser line position with a range of 1 in.
MULTI-FUNCTION BASE
The multi-function base allows the laser level to be used on
irregularly shaped walls or objects. It features built-in loops
for a hook-and-loop strap and angled holes for push pins.
The base also protects the unit when using on a dusty or
dirty surface and during storage.
ROUGH-SURFACE ADAPTOR
The rough-surface adaptor increases the number of sur-
faces on which the AIRgrip vacuum can be used.
VACUUM BASE ON/OFF BUTTON
The vacuum base of your laser level conveniently turns on
and off at the touch of a button.
7
CASE
PUSH PINS
Fig. 2
Advertisement
Table of Contents
