Ryobi ELL1500 - Laser Level Manual

SAFETY RULES

Keep button cell batteries out of sight and reach of children. If you suspect a child has ingested a battery, go to the hospital immediately. Do not induce vomiting or have your child eat or drink anything. For more information, call the National Battery Ingestion Hotline: 202-625-3333. The battery identification number for this product is LR44.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

The use of an optical instrument with this product will increase eye hazard.
The laser guide radiation used in this laser level is Class IIIa with < 5mW and 630-660 nm wavelengths. These lasers do not normally present an optical hazard although staring at the beam may cause flash blindness.

• Avoid direct eye exposure when using the laser and do not project the laser beam directly into the eyes of others. Serious eye injury could result.
• Do not remove or deface any product labels. Removing product labels increases the risk of exposure to laser radiation.
• Do not place the laser level in a position that may cause anyone to stare into the laser beam intentionally or unintentionally. Serious eye injury could result.
• Do not operate the laser level around children or allow children to operate the tool. Serious eye injury could result.
• Always turn the laser level off when not in use. Leaving the tool on increases the risk of someone inadvertently staring into the laser beam.
• Do not operate the laser level in combustible areas such as in the presence of flammable liquids, gasses or dust.
• Always ensure the laser beam is aimed at a surface without reflective properties. Shiny reflective materials are not suitable for laser use.
• Do not disassemble the laser level. There are no user serviceable parts inside.
• Handle the laser level with care. Treat it as you would any other optical device such as a camera or binoculars.
• Avoid exposing the laser level to shock, continuous vibration or extreme hot or cold temperatures. Damage to the tool and/or serious injury to the user could result.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this laser level. If you loan someone this laser level, loan them these instructions also.

The following signal words and meanings are intended to explain the levels of risk associated with the product.
SYMBOL	NAME	EXPLANATION
	Safety Alert	Indicates a potential personal injury hazard.
	Read Operator's Manual	To reduce the risk of injury, user must read and understand operator's manual before using this product.
	Laser Exposure	Laser radiation - avoid direct eye exposure.

HOW TO USE

1. INSTALLING BATTERIES
   Three LR44 button cell batteries are preinstalled. Remove the pull tab to activate the batteries.
   
2. MOUNTING THE LASER LEVEL TO WALL
   
   Remove backing from removable adhesive strip and prepare to stick to the wall.
   
   
3. USING THE LASER LEVEL
   Turn level on. Adjust position as needed to center bubble(s) in appropriate vial(s).
   
4. REMOVING THE LASER LEVEL
   Remove laser level from surface
   

ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579 • www.ryobitools.com
This product has a Three-year Limited Warranty. For warranty details, go to www.ryobitools.com.