Troubleshooting; Power Does Not Turn On / Power Is Turned Off - Marantz M-CR610 Owner's Manual

Contents

Troubleshooting

If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner's manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.

2 Power does not turn on / Power is turned off

Symptom
Power does not turn on.
Power automatically turns off.
2 LED is flashing
Symptom
Flashing red
Flashing orange
Front panel Rear panel
Connections Playback
• Check whether the power plug is correctly inserted into the power outlet.
• The sleep timer is set. Turn on the power again.
• "Auto-Standby" is set. "Auto-Standby" is triggered when there is no operation for a set
amount of time. To disable "Auto-Standby", set "Auto-Standby" on the menu to "Off".
• The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the
repair center.
• The clock is incorrect because the AC was temporarily switched off, etc. Check the network
connection and adjust the clock.
Remote
Settings
Cause/Solution
Cause/Solution
94
Index
Tips Appendix
Page
Page
26
76
84
26
83