Marantz M-CR610 Owner's Manual page 89

Contents
2 When making Wi-Fi connection
In this menu, Wi-Fi settings and connections can be made using any of
the four connection methods.
Auto Scan / WPS(PIN) / Web Browser Setup / Manual
%
• If a LAN cable is connected, remove it.
• See the Quick Setup Guide for details on how to connect to Wi-Fi using the
Wi-Fi CONNECT button on the rear panel.
n Auto-Scan
This automatically searches for networks.
1
From the list of the networks, select the one you want
to connect to.
When the network you want to connect to is not detected, select
"Rescan".
2
Make the following settings.
Default Key : Select the default key.
• When connecting to a "WEP" encrypted network, "Default Key"
menu is displayed.
Password : Input the password.
DHCP / Proxy : Make settings for DHCP / Proxy (vpage 88).
Test Connection : Test the connection.
Front panel Rear panel
Connections Playback
Remote
Settings
n WPS (PIN code method)
1
From the list of the networks, select the one you want
to connect to.
When the network you want to connect to is not detected, select
"Rescan".
2
Set this PIN code to the register.
n Web Browser Setup
Use a web browser to set up Wi-Fi.
A Wi-Fi device that can perform web browse operations is required.
1
Select Web Browser Setup.
2
Press ENTER.
3
Select Wi-Fi network called "Marantz M-CR610" from
your Wi-Fi device.
The IP address appears on the unit.
4
See Step 4 of the Web Control function (vpage 68).
89
Index
Tips Appendix