Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust:
1. P lace the machine in your workout area.
2. S afely stand on the back of the Rail Assembly for approximately 20 seconds.
3. S tep off the machine.
4. L oosen the locking wing nuts and adjust the levelers until they all contact the floor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
5. A djust until the machine is level. Tighten the locking wing nuts.
Make sure the machine is level and stable before you exercise.
21