Table of Contents
Advertisement
Specifications (AITe130)
Performance
Storage Capacity
Bit Error Rate
Data Transfer Rate
(TAPE)
Burst Data Transfer Rate
(SCSI)
Initialize Time
Load Time
Unload Time
Rewind Time
Operating Environment
Operating
Non-operating
Power Supply & Miscellaneous
Power Supply
Case Dimensions
Weight
Accessories
32
Appendix
Specifications may be subject to change, in the interest of technological
improvement, without notice or obligation.
*1
This is assuming 2.6:1 compression ratio.
The degree of data compression attained while recording data varies according to system
environment and data type.
*2
No retries.
130 GB compressed (with SDX2-50C)
50 GB uncompressed (with SDX2-50C)
-17
less than 10
6 MB/s uncompressed
15.6 MB/s compressed
12 MB/s maximum, asynchronous
40 MB/s maximum, synchronous
less than 5 seconds
*2
average of 14 seconds
*2
average of 20 seconds
average of 105 seconds (with SDX2-50C)
Temperature:
10 to 35°C ( T<10°C / h)
(50 to 95°F ( T<18°F / h))
Humidity:
30 to 80% (no condensing)
Maximum wet bulb temperature: 26°C
Temperature:
–40 to 70°C ( T<20°C / h)
(–40 to 158°F ( T<36°F / h))
Humidity:
10 to 90% ( RH<30% / h)
Maximum wet bulb temperature: 45°C (113°F)
100 to 240 V AC, 50/60 Hz
1.2 A
198 64.5 246 mm (W
(excluding protruding parts)
2.4 kg
AIT Drive Unit (1)
Power cable (1)
Operating Instructions/Device Driver
(CD-ROM) (1)
Quick Start Guide (1)
Terminator (1)
Application software (CD-ROM) (1)
Safety Regulations (1)
Warranty card (1)
*1
*1
*2
(78.8°F)
H
D)
Advertisement
Table of Contents
