Table of Contents
Advertisement
Specifications (AITe260)
Performance
Storage Capacity
Bit Error Rate
Data Transfer Rate
(TAPE)
Burst Data Transfer Rate
(SCSI)
Initialize Time
Load Time
Unload Time
Rewind Time
Operating Environment
Operating
Non-operating
Power Supply & Miscellaneous
Power Supply
Case Dimensions
Weight
Accessories
Specifications may be subject to change, in the interest of technological
improvement, without notice or obligation.
*1
This is assuming 2.6:1 compression ratio.
The degree of data compression attained while recording data varies according to system
environment and data type.
*2
No retries.
260 GB compressed (with SDX3-100C)
100 GB uncompressed (with SDX3-100C)
-17
less than 10
12 MB/s uncompressed
31.2 MB/s compressed
12 MB/s maximum, asynchronous
160 MB/s maximum, synchronous
less than 5 seconds
*2
average of 14 seconds
*2
average of 24 seconds
average of 105 seconds (with SDX3-100C)
Temperature:
10 to 35°C ( T<10°C / h)
(50 to 95°F ( T<18°F / h))
Humidity:
30 to 80% (no condensing)
Maximum wet bulb temperature: 26°C (78.8°F)
Temperature:
–40 to 70°C ( T<20°C / h)
(–40 to 158°F ( T<36°F / h))
Humidity:
10 to 90% ( RH<30% / h)
Maximum wet bulb temperature: 45°C (113°F)
100 to 240 V AC, 50/60 Hz
1.2 A
198 64.5 246 mm (W
(excluding protruding parts)
2.4 kg
AIT Drive Unit (1)
Power cable (1)
Operating Instructions/Device Driver
(CD-ROM) (1)
Quick Start Guide (1)
Terminator (1)
Application software (CD-ROM) (1)
Safety Regulations (1)
Warranty card (1)
*1
*1
*2
H
D)
Appendix
31
Advertisement
Table of Contents
