Advertisement
Quick Links
XS35V2 & XS35GT V2 Quick Guide【English】
__p
Front Panel
F3
F1. Power Button
F2. Power Status LED
F4
F3. HDD Status LED
F4. 4-in-1 Card Reader
SD/MMC/MS/MS Pro Memory Card
F5. ODD/ Second HDD (Optional)
F6. ODD Eject Button
F7. USB 2.0 Port
F7
F8. Vertical Stand
F8
Connecting the System
4
3
2
1
5
1
Connecting Monitor or LCD TVs
Digital and analog connections are available so the device can be
connected to computer monitors, flat-panel displays, plasma or LCD TVs.
Analog: Connect this to your computer monitor or LCD TVs.
D-sub Cable
D-Sub Port
Display with D-sub input
Digital (XS35GT V2 only) :
Connect this to your HDMI-enabled computer monitor,
plasma or LCD TV.
HDMI Cable
HDMI Port
Display with HDMI input
Connecting HDTV or external amplifier with HDMI output
(XS35GT V2 only)
Supports HDMI 1.3 standard with the ability to transmit audio and
video signal over the HDMI cable.
HDMI Cable
HDTV HDMI Connector
OR
HDMI Port
Amplifier HDMI Connector
Back Panel
F1
F2
B1
B1. Microphone Jack
B2. Headphone/Line-out Jack
B2
B3. LAN Port
B3
B4. Kensington Lock
F5
B5. USB 2.0 Ports
B6. D-sub Port (XS35V2 only)
F6
B7. Power Jack (DC-in)
B8
B8. D-sub Port (XS35GT V2 only)
B9. HDMI Port (XS35GT V2 only)
B9
B6. D-sub port will not be functional
and be covered with a cap if the sys-
tem is equipped with Nvidia ION GPU.
2
Connecting Keyboard/Mouse or USB Devices
USB Ports
3
Connecting LAN
Wall
RJ45 Cable
LAN Port
4
Connecting Speakers and Microphonea
Microphone,
Headphone/Line-out Jack
5
Connecting Power
3
Power Jack (DC-in)
2
6
Powering on the system
A. Begin Installation
For safety reasons, please ensure that the power cord is disconnected
before opening the case.
1. Unscrew one screw of the chassis cover.
B4
2. Slide the cover backwards and upwards.
2
3
B5
Screw
1
B6
Cap
B. Memory Module Installation
B7
1. Locate the SODIMM (DIMM1) slot on the mainboard.
2. Align the notch of the memory module with the one of the memory
slot.
SODIMM slot- DIMM1
notch
USB Keyboard/Mouse
3. Gently insert the module into the slot in a 45-degree angle.
4. Carefully push down the memory module until it snaps into the
locking mechanism.
USB Devices
2
Internet
45-degree
angle
DSL/Cable Modem
1
3
Latch
Microphone/Headphone
Speakers
C. HDD Installation
1. Mount HDD into the bracket with four screws.
1
2. As shown, install the HDD & bracket in the chassis and push it
towards the direction as indicated by the red arrow to connect
the HDD connector.
The product's colour and specification will depend on the actual shipping product.
L
3. Tighten the HDD & bracket with three screws.
D. ODD or Second HDD Installation
1. Turn your XS35V2 / XS35GT V2 upside down and remove
another cover.
2. As shown, install the ODD/HDD Adapter Card with two screws and
connect the cable to CN2/CN1.
For the ODD: install the ODD Adapter Card
CN2
For a second HDD: install the HDD Adapter Card
If you are installing a second HDD, tighten the two nuts first just
as shown.
1
two nuts
2
CN1
1
3. Mount ODD/HDD into the bracket with screws.
2
For the ODD
Screw
Bracket
For a second HDD
Latch
HDD
Screw
4. As shown, install the ODD/HDD & bracket in the chassis and push
it towards the direction as indicated by the red arrow to connect the
ODD/HDD connector.
For the ODD
ODD Connector
For a second HDD
HDD Connector
HDD Connector
5. Turn your XS35V2 / XS35GT V2 upside down and tighten the
ODD/HDD & bracket with one screw.
Screw
E. Complete
1. Replace the cover and refasten one screw.
2. Tear off the double sided protective membrane.
1
2
Protective Membrane
Screw
Using the Vertical Stand
Install vertical stand and check that it is properly aligned, then
tighten securely with one screw.
ODD
Screw
Bracket
Vertical Stand
Safety Information
Read the following precautions before setting up a Shuttle PC.
CAUTION
Incorrectly replacing the battery may damage this co-mputer.
Replace only with the same or equivalent as
recommended by Shuttle. Disposal of used batteries
according to the manufacturer's instructions.
Laser compliance statement
The optical disc drive in this PC is a laser product.
The drive's classification label is located on the drive.
CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN
OPEN.AVOID EXPOSURE TO BEAM.
53R-XS35V3-2001
Advertisement
