Connecting Power Supply - Hitachi CP-X600 Operating Manual

Setting up

Connecting power supply

.
Connect the connector of the power cord to the AC inlet of the projector.
.
Firmly plug the power cord's plug into the outlet.
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range.
• Never modify the power cord.

AC inlet
Connector of the power cord
to the outlet