Roland V-Drums V-Pad PD-80R Owner's Manual page 2

Recommended Settings for the Percussion Sound Module
Recommended settings for the trigger parameters when using the PD-80/PD-80R with various percussion sound
modules.
• When used with a percussion sound module capable of positional sensing, you can obtain tonal changes by varying the location
at which the pad is struck.
• You can perform rim shots and cross-sticking with the PD-80R. For information on sound generator and trigger input
combinations, refer to p. 6.
• The trigger parameters should be adjusted as necessary to match the actual state of your configuration, and the environment in
which it is being used.
• For information on how to change the parameters for a percussion sound module. Refer to the documentation for the percussion
sound module you're using.
TD-10 (TDW-1 V-Cymbal Control, TDW-1)
Trigger Type
Sensitivity
Threshold
Curve
Scan Time (*1) 1.8
Retrigger Cancel (*1) 4
Mask Time (*1) 8
Xtalk Cancel (*1) 50
Mount Type (*1) PadMount
Xstick Thrshld
Rim Sens
TD-10 (Non expanded)
Trigger Type
Sensitivity
Threshold
Curve
Scan Time (*1) 1.8
Retrigger Cancel (*1) 3
Mask Time (*1) 12
Xtalk Cancel (*1) OFF
Rim Sens
TD-8
TRIGGER TYPE
SENSITIVITY
THRESHOLD
CURVE
RIM SENS
SCAN TIME
RETRIGCANCL
MASK TIME
CROSSTALK
CROSS STICK
TD-6V
TrigType
Sensitivity
Threshold
TrigCurve
Xtalk Cancel
Scan Time
Retrig Cancel
Mask Time
Rim Sens
*1: You need to set each advanced trigger parameter after setting the trigger type.
*2: Each trigger parameter can be set independently for the "head-side" and "rim-side." Set to the same value for the head and rim.
Trigger parameters can be set individually for each patch.
PD-80: 8 A or 8 B, PD-80R: 8RA or 8RB
5
2
Linear
75 (PD-80R only)
8 (PD-80R only)
12A
3
1
Linear
8 (PD-80R only)
PD-80: 8 A or 8 B, PD-80R: 8RA or 8RB
7
3
LINEAR
8 (PD-80R only)
PD-80R: 2, PD-80: 1
3
0
45
5 (PD-80R only)
PD-80: PD80/100, PD-80R: PD80R
8
PD-80R: 3, PD-80: 1
LINEAR
40
1.0
3
4
11 (PD-80R only)
TD-7
(*2)
Cross Talk Group
Velocity Curve
Choke
Max Dyna
MIn Dyna
Min Velo
Mask Time
Threshold
TD-5
TRIGGER TYPE
SENSITIVITY
THRESHOLD
CURVE
SPD-20
TRIG SENS
TRIG THRESHOLD
TRIG TYPE
TRIG CURVE
RIM SENS
SPD-11
Trig Sens
Trig Threshold
Trig Mask Time
Trig Scan Time
SPD-S
Input Mode
Trigger Type
Sensitivity
Threshold
Velocity Curve
Scan Time
Retrigger Cancel
Mask Time
Xtalk Cancel
Rim Sensitivity
Rim Gain
HPD-15
Input Mode
Trig Type
Trig Sens
Curve
Threshold
Scan Time
Retrig Cancel
Mask Time
X-Talk Rate
Rim Sens
2
OFF
Norm3
OFF
5
9
1
0
1
P1
4
1
Lnr
8
0ß40
120
1
1 (PD-80R only)
8
1
0
20
PD-80: TRIGx2, PD-80R: HD/RM
PD-80: PD-80/100, PD-80R: PD-80R
8
PD-80: 3, PD-80R: 2
LINEAR
1.0
PD-80: 4, PD-80R: 3
4
30
11 (PD-80R only)
1.2 (PD-80R only)
PD-80: TRIGx2, PD-80R: HD/RM
PD-80: PD-80, PD-80R: PD-80R
8
Linear
2
1ms
2
2ms
50%
8 (PD-80R only)