Hitachi CP-X268AWF User's Manual And Operating Manual page 65

Hitachi projector user manual
Table of Contents

Advertisement

MIU Menu
MIU Menu (continued)
Item
INFORMATION
SERVICE
56
INFORMATION display :
See [INFORMATION] in [User's Manual] – Network Functions] for more information.
~Note~
• When the voltage level of battery for built in clock decreases, set time may
become incorrect even though accurate date and time are input.
Replace a battery through the following the instructions. (
• MAC wireless will not be displayed when NETWORK MODE is WIRED
even if wireless LAN SD card is mounted.
• IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY displays "0.0.0.0" at
the following condition.
(1) NETWORK MODE is WIRELESS and wireless LAN SD card is not
mounted.
(2) DHCP is ON and projector dose not get address from DHCP server.
MIU RESTART
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART, Network menu may not be controlled approx. 20 seconds.
REMOVE MEDIA
Remove SD CARD and USB memory safely. Choose the media and press
~Note~
Make sure to execute this procedure before you remove the SD Card and
USB Memory.
Description
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART
MIU RESTART
EXECUTE
CANCEL
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART
REMOVE USB
EXECUTE
CANCEL
61)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x268a

Table of Contents