Hitachi CP-X268AWF User's Manual And Operating Manual page 64

MIU Menu (continued)
Item
SETUP
MODE
Select the communication connection control
method to use between the PC and projector.
Match to your PC's settings.
used.
ADHOC INFRASTRUCTURE
CH
Select the channel when using a wireless LAN
connection.
(Channels 1 to 11 are available)
*The available channels would be various
depending on a country. In addition, wireless
LAN card might be required due to the standard.
ENCRYPTION
Select the encrypting method.
method to be used.
WPA2-PSK(AES)
WPA-PSK(AES)
SPEED
AUTO 54 48 36 24 18 12 11 9 6 5.5 2 1 (Mbps)
• The AUTO mode automatically selects the optimum rate.
• Transfer rates may change due to the Network situation.
Mbps : Megabits per second
NETWORK MODE
Select the Network mode.
WIRELESS WIRED
~Note~
• Network mode will be initialized whenever the power is turned on
with Power switch.
• The Wireless will be enabled when Wireless Network card is installed.
• The Wired will be enabled when Wireless Network card is not installed.
Description
WPA-PSK(TKIP) WEP 128bit
MIU Menu
WEP 64bit OFF
55