Hitachi CP-X268AWF User's Manual And Operating Manual page 54

OPTION Menu (continued)
Item
SERVICE
REMOTE FREQ.
setting ( 18).
1:NORMAL 2:HIGH
Items with a checkmark are on. The factory default setting is for
both 1:NORMAL and 2:HIGH to be on. If the remote control does
not function correctly set the this to either only 1 or only 2 as
described in Remote Control Settings (
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled "INPUT INFORMATION".
It shows the information about the current input.
INPUT-INFORMATION
RGB
1024x768 @60Hz
FRAME LOCK
• The "FRAME LOCK" message on the dialog means the frame lock
function is working.
• The "SCART RGB" message means the COMPONENT VIDEO
port is working as a SCART RGB input port. Please refer to the
COMPONENT item in INPUT menu. (
• This item can't be selected for no signal and sync out.
FACTORY RESET
this function, all the items in all of menus will collectively return to
the initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE and SECURITY are not reset.
RESET CANCEL
Description
18).
INPUT-INFORMATION
S-VIDEO
SECAM
AUTO
35)
OPTION Menu
INPUT-INFORMATION
COMPONENT
576i @50
SCART RGB
45