Utilize Web Remote Control - Hitachi CP-X268AWF User's Manual And Operating Manual

2. Equipment connection and network setting

2.6 Utilize Web Remote Control

You can use your Web browser to remote control the projector once the projector
wired LAN.
NOTE • Do not attempt to control the projector with the projector's remote
control and via your Web browser at the same time. Attempt to do so may
causes a projector operational error.
Open browser when it is possible to communicate with projector. Corresponding
browser is Internet Explorer 5.5 or later.
Specify http://(projector IP address)/ to start.
For example, http://192.168.1.10/
(Input this URL when IP address is not changed.)
After start up, enter your ID and password, and click [Logon]. Following window
Fig. 2.6.a Utility selection window for Web Remote Control
42