Westerbeke BTG-9KW Operator's Manual page 45

4-Pole Generator Voltage
Load Speed Frequency l20V (110) 240V (220)
Applied
(rpm) (Hertz)
plants Plants
None 1830 62
122 244
(1530) (52 ) (112 ) (224 )
Half
1800 60 120 240
(1500) (50) (110) (220)
Full
1755
59
110 220
(1455 ) (49 ) (100) (200 )
The output voltage should be checked periodically to ensure proper
operation of the generating plant and the appliances it supplies.
If an AC voltmeter or ammeter is not installed to monitor voltage and
load, check it with a portable meter and amprobe.
Preventive Maintenance
Maintenance on the generator is minimal.
• Keep the generator clean, dry and well-ventilated.
• Ensure all connections are clean and tight and that cables carry-
ing AC voltage are properly supported and protected against
chaffing.
• The rear armature bearing is lubricated and sealed; therefore, no
maintenance is required. If the bearing becomes rough or noisy,
replace it.
General Troubleshooting
A complete and illustrated text on troubleshooting the 9 KW BTG
Generator is furnished in the Technical Manual that is available
through your local dealer.
39