Displaying Supplementary Status Information - Sony DSR-DR1000 Operating Instructions Manual

factory default settings. Wait until the saving is
completed before powering off the unit.
To cancel the resetting operation
Instead of pressing the SET button, press the RESET
button. The display returns to menu level 1, leaving
the settings unchanged.
Displaying
Supplementary Status
Information
When you set the SUB STATUS menu item (see page 69)
to other than OFF, you can view supplementary status
information on the monitor screen below the operating
mode display area.
T C R 0 0 : 0 4
P L A Y
Supplementary status information
The following items of supplementary status information
are displayed depending on the setting of the SUB
STATUS menu item.
Setting of SUB Items of supplementary
STATUS menu item information displayed
TC MODE Operating mode of the internal time
code generator
REMAIN Remaining capacity of the disk
CLIP NAME Clip name
AUDIO MIXING Setting for input audio mixing
ALL All of the above items
The following tables show the on-screen indications of
supplementary information and their meaning.
In each table, the indications given in brackets such as
[ASM] are the indications displayed when the SUB
STATUS menu item is set to ALL.
For the display format when ALL is selected, see the next
section.
When the SUB STATUS menu item is set to TC MODE:
On-screen Meaning
indication
INT PRST FREE The internal time code generator is
[IP F] operating in FREE RUN mode.
INT PRST REC The internal time code generator is
[IP R] operating in REC RUN mode.
INT REGEN-T&U The internal time code generator is in
[IRTU] synchronization with the playback
time code (LTC) read from tape.

Displaying Supplementary Status Information

. .
4 7 0 7
L O C K
X
M I E D T U V
81