ENSONIQ DP/4+ Reference Manual page 97

10 — Diffusion 2
Similar to and in series with Diffusion 1, this parameter controls lower frequency ranges.
11 — Decay Definition
Controls the rate at which echo density is increased with time. If set too high, the echo density
will build at a rate that exceeds the decay rate. This can be used for a special effect.
12 — Mod1 Source
13 — Mod1 Destination
14 — Mod1 Param Range Min 18 — Mod2 Param Range Min
15 — Mod1 Param Range Max19 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators, in the beginning of this section.
ENSONIQ DP/4+ Reference Manual
Range: 00 to 99
Range: 00 to 99
16 — Mod2 Source
17 — Mod2 Destination
Section 2 — Algorithms
81