ENSONIQ DP/4+ Reference Manual page 62

Section 2 — Algorithms
11 — Noise Gate Off Below
Sets the lower threshold level at which the noise gate shuts off the audio.
12 — Noise Gate On Above
Sets the upper threshold level at which the noise gate passes the audio. The higher second
threshold prevents false "turn ons."
13 — Gate Release Time
This parameter sets the amount of time after the signal has elapsed for the noise gate to shut
down. For a longer sustain, set this parameter higher.
14 — Speaker High Pass Cutoff
This parameter filters out the low frequencies of the main amp prior to the speaker. The higher
the value, the less low frequencies pass through.
15 — OutEQ1 Fc
This parameter determines the filter center frequency of the parametric in the main amp stage.
Higher values have a brighter sound.
16 — OutEQ1 Gain
This parameter adjusts the amount of boost or cut applied to the main amp parametric.
17 — OutEQ1 Q
Determines the width of the resonant peak of the filter center. While the Filter center parameter
determines where (at what frequency) this peak will occur, the Q setting controls the presence of
the peak.
18 — OutEQ2 Fc
This parameter determines the filter center frequency of the second parametric in the main amp
stage. Higher values have a brighter sound.
19 — OutEQ2 Gain
This parameter adjusts the amount of boost or cut applied to the second main amp parametric.
20 — OutEQ2 Q
This parameter determines the width of the resonant peak of the second filter center.
21 — Speaker Low Pass Cutoff
Filters out the high frequencies of the speaker. The lower the value, the less high frequencies
pass through. This speaker filter is less selective than the speaker cabinet emulation algorithms.
22 — Mod1 Source
23 — Mod1 Destination
24 — Mod1 Param Range Min 28 — Mod2 Param Range Min
25 — Mod1 Param Range Max29 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators earlier in this section.
46
Range: -96 to +00 dB
Range: -96 to +00 dB
Range: 1ms to 10.0s
Range: 4 to 1000 Hz
Range: 100 to 9999 Hz
Range: -48 to +24 dB
Range: 01 to 18
Range: 100 to 9999 Hz
Range: -48 to +24 dB
Range: 01 to 18
Range: 2.0 to 16.0 KHz
26 — Mod2 Source
27 — Mod2 Destination
ENSONIQ DP/4+ Reference Manual