Removing A Media Card Reader - Dell Dimension 5000 Service Manual

Hide thumbs Also See for Dimension 5000:
Table of Contents

Advertisement

 Media Card Reader

Removing a Media Card Reader

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
 
1. Follow the procedures in
"Before you
 
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
 
3. Replace the
computer
cover.
 
4. Remove the
drive
panel.
1 cables
2 Media Card Reader (not present on all computers)
 
5. Disconnect the cable on the back of the Media Card Reader to the front panel USB connector on the system board and route the cable through the clip
on the shroud.
Begin."

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dimension 5000

Table of Contents