Power On/Off; Turning On The Power; Turning Off The Power - Hitachi CP-RX79 User Manual

Power on/off

Turning on the power

1.
Make sure that the power cord is rmly and
correctly connected to the projector and the
outlet.
2.
Make sure that the
steady orange (
3.
Press STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
56).
(
To display the picture, select an input signal according to the section "Selecting an
14).
input signal" (

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control. The
message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in
orange. Then POWER indicator will stop blinking and light in steady orange
when the lamp cooling is complete (
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on.
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
• Turn the power on/off in right order. Please power on the projector
NOTE
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the
items of the OPTION menu.
indicator is
POWER
56).
►A strong light is emitted when the projector's power is on. Do
DIRECT POWER ON
STANDBY/ON button
POWER indicator
56).
Such operations might
40) and
AUTO POWER OFF
(
Power on/off
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
RESET
ESC
41)
(
13