My Text Writing - Hitachi CP-RX79 User Manual

Item
(1) Use the ▲/▼ buttons on the SECURITY menu to
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY
MY TEXT
When it is set ON, the MY TEXT will be displayed
DISPLAY
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ buttons on the
(2) The current MY TEXT will be displayed
MY TEXT
WRITING
(3) To change an already inserted
(4) To nish entering text, move the cursor to the OK on screen and press
•
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
select the MY TEXT DISPLAY and press the ►
button to display the MY TEXT DISPLAY on/off
menu.
on/off menu to select on or off.
ON OFF
SECURITY menu to select the MY
TEXT WRITING and press the ►
button. The MY TEXT WRITING dialog
will be displayed.
on the rst 3 lines. If not yet written, the
lines will be blank.
Use the ▲/▼/◄/► buttons and the
ENTER or INPUT button to select and
enter characters. To erase 1 character
at one time, press the RESET button
or press the ◄ and INPUT button at
the same time. Also if you move the
cursor to DELETE or ALL CLEAR on
screen and press the ENTER or INPUT
button, 1 character or all characters will
be erased. The MY TEXT can be input
up to 24 characters on each line.
character, press the ▲/▼ button to
move the cursor to one of the rst 3
lines, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
the ►, ENTER or INPUT button. To revert to the previous MY TEXT
without saving changes, move the cursor to the CANCEL on screen and
press the ◄, ENTER or INPUT button.
Description
SECURITY menu
49