Setup Menu; Mirror - Hitachi CP-RX79 User Manual

SETUP menu

From the SETUP menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
KEYSTONE
AUTO ECO
MODE
ECO MODE

MIRROR

(continued on next page)
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
ON OFF
• When ON is selected, the projector will always be set to Eco mode
at start-up regardless of the ECO MODE (
message "AUTO ECO MODE" will be displayed for tens of seconds
when the projector starts with this function activated.
Using the ▲/▼ buttons changes the eco mode setting.
NORMAL ECO
• When the ECO is selected, acoustic noise and screen brightness
are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL H:INVERT
Description
Shrink the top of the image
below) setting. An OSD
V:INVERT H&V:INVERT
SETUP menu
33