Table of Contents
Advertisement
Chapter 4: BIOS
Hit 'DEL' Message Display
Use this option to Enable or Disable the "Press DEL to run setup" message in
POST.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled
and Disabled.
Watch Dog Function
This option allows the system to restart when it isn't active for more than
5-minutes. Options include Enabled and Disabled.
Power Button Function
Use this option to select the mode for the power button when it is turned off.
Options include 4 Seconds Override or Instant Off.
Restore on AC Power Loss
This option sets the action the system will take if there is an AC power loss to
the system. Options include Power Off, Power On or Last State.
Processor & Clock Options Confi guration
CPU Confi guration
This displays static information on the Module Version, AGESA Version, Physical
Count and Logical Count for the system's processor(s) and clock.
CPU Information
This setting is used to select which physical CPU's information to display. Options
include Processor 0 or Processor 1. The information for the selected processor
includes Processor number, Revision, Cache L1/L2/L3, Speed, NB CLK, Able to
Change Frequency and uCode Patch Level.
Note: Zero is always the "Boot Strap Processor" or main CPU with all others
being "Application Processors".
GART Error Reporting
This option should remain disabled for normal operation. The driver developer
may enable this option for testing purposes. Options are Enabled or Disabled.
Microcode Update
This setting Enables or Disables microcode updating.
4-3
Advertisement
Table of Contents
