Table of Contents
Advertisement
2-7
Connector Defi nitions
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (designated
LAN1 and LAN2) are located beside the
VGA port. Additionally, there is a dedicated
LAN port for IPMI beside the two rear USB
ports. These Ethernet ports accept RJ45
type cables.
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB 2.0)
and one additional Type A port (USB4) are
included on the serverboard. See the table
on the right for pin defi nitions.
USB Headers
Two USB 2.0 headers (USB2/3) are also
included on the motherboard. These may
be connected to provide front side access. A
USB cable (not included) is needed for the
connection. See the table on the right for
pin defi nitions.
Serial Ports
The COM1 serial port is located beside the
VGA port. Refer to the motherboard layout
for the location of the COM2 header. See the
table on the right for pin defi nitions.
Universal Serial Bus Ports
Pin Defi nitions (USB0/1, USB4)
USB0
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
Universal Serial Bus Headers
Pin Defi nitions (USB2/3)
USB2
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
Note: NC indicates no connection.
Serial Port Pin Defi nitions
Pin # Defi nition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
Note: NC indicates no connection.
2-9
Chapter 2: Installation
USB1
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
USB3
Pin # Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
NC
(COM1/COM2)
Pin # Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Advertisement
Table of Contents
