Verifying Linux Installation - Nvidia TESLA C2050 Installation Manual

DRIVER INSTALLATION
Linking of the kernel interface (in the case that the interface
downloaded or compiled at installation) required you to have a linker
installed on your system. The linker, usually /usr/bin/ld, is part of the
binutils package. If a precompiled kernel interface is not found, you
must install a linker prior to installing the NVIDIA driver.
8
Run nvidia-xconfi g utility.
nvidia-xconfi g will fi nd the X confi guration fi le and modify it to use the
NVIDIA X driver. In most cases, you can answer Yes when the installer
asks if it should run it. If you need to reconfi gure your X server later,
you can run nvidia-xconfi g again from a terminal. nvidia-xconfi g will
make a backup copy of your confi guration fi le before modifying it.
9
Installation is complete.
Note: The X server must be restarted for any changes to its
confi guration fi le to take eff ect.
More information about nvidia-xconfi g can be found in the
nvidia-xconfi g manual page by running:
% man nvidia-xconfi g

Verifying Linux Installation

1
Run nvidia-settings to displays the Server Settings window.
2
Verify here that the installation is correct and working.
19