Compaq TFT5010 User Manual page 12

CAUTION:
positioned over a table or desktop before removing the
base from the monitor.
6. Remove the monitor base from the monitor.
When the base is removed, four threaded mounting holes are exposed
on the monitor panel to be used for mounting purposes. These
mounting holes are spaced 75 mm apart and are compliant with the
Video Electronics Standards Association (VESA) standard for
mounting flat panel displays.
To mount the monitor on a swing arm or other mounting fixture,
follow the instructions included with the mounting fixture to be used.
10 English
Ensure that the bottom of the monitor base is