Compaq TFT5010 User Manual page 10

Adding a Compaq Powered USB Hub
The monitor base is designed to house an optional Compaq Powered
USB hub. The Compaq Powered USB hub is not included with the
monitor. It is sold separately. For information on purchasing the
Compaq Powered USB hub (part no. 138638-xxx), call your Compaq
authorized dealer, seller, or reseller. To locate a reseller near you, call
Compaq at 1-800-AT-COMPAQ or visit the Compaq web site at
http://www.compaq.com .
To remove the housing cap from the base:
1. Press down on the top of the cap.
2. Pull the cap outwards to remove it.
The following are required to operate the Compaq Powered USB hub:
Your computer must be fitted with a USB port.
Your computer must have Microsoft Windows 95 OSR2.1 or
later, or Microsoft Windows 98 as the operating system.
USB connectors are used to connect USB-compatible Plug and Play
devices such as a keyboard, mouse, or joystick to the USB hub using
Plug and Play install procedures. Plug and Play install procedures
consist of plugging in the USB device while the system is turned on
and using it without reconfiguring your computer.
8 English