Table of Contents
Advertisement
Press EXIT to quit menu or cursor
NOTE:
1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 32), when a channel is locked, it is
locked on both antenna inputs.
2. When using TV TIME OUT make sure the clock is set (see page 36).
4 EVENT PROG.
This function will automatically turn the TV on and off, one time only, every day or once a week.
Press CURSOR
to select PROGRAM 1, 2, 3, or 4.
Press CURSOR
or
Use CURSOR
to change position.
Press CURSOR
or
only) or MODE: DAILY (TV will turn on/off at the same time every day), or MODE: WEEKLY (TV will turn on/off at
same time every week) and MODE: OFF (to disable this function).
Press CURSOR
or
when it automatically turns on.
Press EXIT to quit menu or THUMB STICK
If the clock is not set, you can not use this function and the screen below will appear.
NOTE:
to return to the previous menu.
to select the time the TV will turn on and off.
to highlight then CURSOR
or CHANNEL (
) or (
to return to previous menu.
to select MODE: ONCE (TV will turn on/off one time
) or number buttons to set the channel the TV will tune to
Advertisement
Table of Contents
