Event Prog - Hitachi 46GX01B Operating Manual

CUSTOM
function) and then press cursor
MOVIE/TV RATINGS are explained in detail in the Parental Control Movie/TV Ratings Reference Guide.
To change the secret code number, select CHANGE SECRET CODE. Enter a new four digit key number you
prefer.
If you forget your secret code, use the factory code 7777 to erase your key number. This will reset the key
number back to the factory preset 0000.
Press EXIT to quit menu or cursor
NOTE:
1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 32), when a channel is locked, it is
locked on both antenna inputs.
2. When using TV TIME OUT make sure the clock is set (see page 36).

4 EVENT PROG.

This function will automatically turn the TV on and off, one time only, every day or once a week.
Press CURSOR to select PROGRAM 1, 2, 3, or 4.
Press CURSOR or
Use CURSOR to change position.
Press CURSOR or
only) or MODE: DAILY (TV will turn on/off at the same time every day), or MODE: WEEKLY (TV will turn on/off at
same time every week) and MODE: OFF (to disable this function).
Press CURSOR or
when it automatically turns on.
to select your choice.
to return to the previous menu.
to select the time the TV will turn on and off.
to highlight then CURSOR
or CHANNEL ( ) or (
to select MODE: ONCE (TV will turn on/off one time
) or number buttons to set the channel the TV will tune to
56