Table of Contents
Advertisement
CUSTOM
NOTE: 1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 32), when a channel is locked, it is
locked on both antenna inputs.
2. When using TV TIME OUT make sure the clock is set (see page 36).
4 EVENT PROG.
This function will automatically turn the TV on or off, one time only, every day, or once a week.
Press CURSOR
to select PROGRAM 1, 2, 3, or 4.
Press CURSOR
or
Press CURSOR
to change position.
Press CURSOR
or
MODE: DAILY (TV will turn on/Off at the same time every day), or MODE: WEEKLY (TV will turn on/off at same time
every week) and MODE: OFF (to disable this function).
Press CURSOR
or
automatically turns on.
Press EXIT to quit menu or CURSOR
IF the clock is not set, you can not use this function and the screen below will appear.
NOTE: 1. The OFF Timer will only activate if the TV was turned on or tuned with the ON Timer, and no channel
selection was made after this time. If you change the channel after the ON Timer has been activated, the OFF Timer will
deactivate.
to select the time the TV will turn on and off.
to highlight then CURSOR
, or CHANNEL (
) or (
to return to previous menu.
to select MODE: ONCE (TV will turn on/off one time only) or
), or number buttons to set the channel the TV will tune to when it
- 45 -
Advertisement
Table of Contents
