Sony DVP-CX777ES Service Manual page 34

DVP-CX777ES
8. Changer Mecha Check
On this test mode screen, selecting
and the disc sensor adjustment. The following screen appears.
[8]
Display when is selected in the Drive Manual Operation
## Changer Mecha Check ##
ENTER : Mecha Initial
OP/CL : Disc Load/UnLoad
jogFOR : Table R StepTurn
jogPRV : Table L StepTurn
PLAY : Table Rotate
PAUSE : Mecha Adjust
DISP : Sensor Status
_
RETURN : Exit
All operations are the same as those of the Changer Manual Move
[OP/CL] [PLAY]
except , and
[OP/CL]
: Loads the disc from the chucking position
Disc Load/UnLoad of the T.table toward inside the MD or from
inside the MD to the T.table.
When the Disc Load is selected a series of
operation starting from Door Close – T.table
Rotate – Chucking is performed.
When the Disc UnLoad is selected a series
of operation starting from Unchucking –
T.table Rotate – Door Open is performed.
[PLAY]
: Enters the Disc Sensor Adjustment Mode.
Table Rotate (Refer to the "5. Mechanical Adjustments"
(page 45))
The 400CHG Table Rotate appears on the
screen.
[PAUSE]
: Enters the Table Sensor Adjustment Mode.
Mecha Adjust (Refer to the "5. Mechanical Adjustments"
(page 45))
The 400CHG Mecha Adjust appears on the
screen.
[PLAY]
Display when is selected in the Changer Mecha Check.
## 400CHG Table Rotate ##
RIGHT : Turn Right
LEFT : Turn Left
Table 1/2/3/4
Disc Sensor
RETURN : Exit
[RIGHT]
: Rotates T.table anti clock wise.
Turn Right
[LEFT]
: Rotates T.table clock wise.
Turn Left
Table 1/2/3/4 : These items are the same as those of the
Disc Sensor 400CHG Sensor Check.
34
[8]
enables the table sensor
[PAUSE]
.
: X/X/X/X
: XXX
[PAUSE]
Display when is selected in the Changer Mecha Check.
## 400CHG Mecha Adjust ##
UP : Load in
DOWN : Load out
RIGHT : Pop Up
LEFT : Pop Down
Table 1/2/3/4
RETURN : Exit
[UP]
: Loads the disc from the chucking position
Load in of the T.table toward inside the MD during
pressing
[DOWN]
: Loads the disc from inside the MD to the
Load out T.table during pressing
[RIGHT]
: Pops up the lever.
Pop Up
[LEFT]
: Pops down the lever.
Pop Down
Table 1/2/3/4 : This item is the same as that of the 400CHG
Sensor Check.
: X/X/X/X
[UP]
.
[DOWN]
.