ZyXEL Communications P-660RU-Tx Series Support Notes page 57

Key Settings:
IP/MAC Filter
Set Index
IP/MAC
Filter Set Interface
Editing
Direction
IP/MAC Filter
Rule Index
IP/MAC
Filter Rule
Editing
Rule Type
Protocol
Rule
Unmatched
Ip/MAC
Filter Listing You can check your filter rules have set according to the set Index.
Filter by Application
You can set filter condition by application here.
All contents copyright © 2010 ZyXEL Communications Corporation.
P-660RU-Tx Series Support Note s
Select to define set index number. There are twelve sets in
all
Choose an active PVC to set in the pull down menu
Choose one of the filter direction: Both, Incoming,
Outgoing.
Choose a number as a rule index. There are 6 rules you
can configure
You can choose to filter by IP or MAC. If you choose filter
by IP, you will need to set source and destination IP as well as
port number of those packets you want to filter address
according to your need; if choose MAC as filter condition,
you may need to set their MAC Addresses from/to where
the packets come/go
You can choose one of the protocols: (TCP, UDP or ICMP)
those to be filtered packets use
Define the action our P-660RU-Tx would take when the
packets meets none of the rules.
57