ZyXEL Communications P-660RU-Tx Series Support Notes page 33

Adsl2+ ethernet/usb router

Hide thumbs Also See for P-660RU-Tx Series:

Table of Contents

P-660RU-Tx Series Support Note s

P-660RU-Tx, a server must have a fixed IP address and not be a DHCP

client whose IP address potentially changes each time P-660RU-Tx is

powered on.

Configuration

To make a server visible to the outside world, specify the port number of the

service and the inside address of the server in Web Configurator, Advanced

Setup, Advance Setup -> NAT -> DMZ. The outside users can access the

local server using the P-660RU-Tx's WAN IP address which can be obtained

from Web Configurator, Status -> Device Info. For example: Configuring

an internal Web server for outside access (suppose the Server IP Address

is 192.168.1.33):

Enable DMZ and fill in the DMZ Host IP Address, press button „Save‟

Note that there are some default ports for different applications. If you want to

change them, you could write it in the start port number and end port number

columns and press button „Save‟ to submit your settings.

Table of Contents