Mercedes-Benz G 500 Operator's Manual page 161

Controls in detail
Control system
This standby message indicates that your
telephone is ready for use and you can
operate it using the control system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will then see
the message:
Press button s.
You have answered the call. The
duration of the call appears in the
multifunction display.
160
Ending a call or rejecting an incoming
call
Press button t.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Press button ÿ or è repeatedly
until the message appears in the
TEL
multifunction display.
Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. The
message appears in the
Please wait
multifunction display.
When the message
Please wait
disappears, the phone book has been
loaded.
Press button j or k repeatedly
until the desired name appears in the
multifunction display.
The stored names are displayed in
ascending or descending alphabetical
order.
1 Name from the phone book
i
If you press and hold button j or k
for longer than 1 second, the system scrolls
rapidly through the list of names until you
release the button again.
Cancel the quick search mode by pressing
button t.