Mercedes-Benz G 500 Operator's Manual page 153

Controls in detail
Control system
i
For safety reasons, changing the setting for
the daytime running lamp mode is not possible
while the vehicle is in motion. The following
message appears in the multifunction display:
Setting can
only be made
at a standstill
For safety reasons, resetting to factory settings
( page 146) while driving will not de activate the
daytime running lamp mode.
For more information on the daytime
running lamp mode, see "Lighting"
( page 117).
152
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position U ( page 117), the following
lamps will switch on during darkness when
the vehicle is unlocked using button Œ
on the SmartKey:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
Front fog lamps
The locator lighting switches off when the
driver's door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
appears in the multifunction display.
The selection marker is on the current
setting.
Press button æ or ç to switch
the locator lighting function
Turn the exterior lamp switch to
position U when exiting the vehicle.
The locator lighting feature is
activated.
Lighting
Surround lighting
or .
On Off