Vehicle Remote Malfunction Diagnosis - Mercedes-Benz C-Class Operator's Manual

1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
Canada: Customer Service at
R
1-888-923-8367
You will be asked for your password.
The next time you are inside the vehicle and
you switch on the ignition, the
Locked Remotely message appears in the
multifunction display.
USA only: alternatively, the vehicle can be
locked via:
the Internet, under the "Owners Online"
R
section
the telephone application (e.g. iPhone
R
Blackberry)
To do this, you will need your identification
number and password.
i
The vehicle remote closing feature is
available when the relevant mobile phone
network is available and data connection is
possible.
Stolen vehicle recovery service
If your vehicle has been stolen:
Notify the police.
X
The police will issue a numbered incident
report.
This number will be forwarded to the
X
Mercedes-Benz Customer Assistance
Center together with your PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance
Center contacts you and the local law
enforcement agency if the vehicle is
located.
However, only the law enforcement agency
is informed of the location of the vehicle.
i
If the anti-theft alarm system is activated
for longer than 30 seconds, the Mercedes-
Benz Customer Assistance Center is
automatically informed.

Vehicle remote malfunction diagnosis

With the vehicle remote malfunction
diagnosis (Vehicle Health Check), the
Customer Assistance center can provide
improved support for problems with your
vehicle. During an existing call, vehicle data
is transferred to the Customer Assistance
Doors
center. The customer service representative
can use the received data to decide what kind
of assistance is required. You are then, for
example, guided to the nearest authorized
Mercedes-Benz Center or a recovery vehicle
is called.
If vehicle data needs to be transferred during
®
,
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
center. You will see the
Assistance Connected
COMAND display. If the vehicle remote
malfunction diagnosis can be started, the
Request for vehicle diagnosis
received. Start vehicle diagnosis?
message appears in the display.
Confirm the message with Yes.
X
When the
X
start ignition
the SmartKey to position 2 in the ignition
lock (
When the
X
instructions received by phone and
move your vehicle to a safe
position.
customer service representative's
instructions.
The message in the display disappears.
If you select Cancel, the vehicle remote
malfunction diagnosis is canceled
completely.
The vehicle operating state check begins.
You will see the
activated.
When the diagnosis is completed, the
vehicle diagnostics data//(Voice
connection may be//interrupted
during data transfer)
Roadside
message in the
Vehicle Diagnosis Please
message appears, turn
page 147).
Y
Please follow the
message appears, follow the
Vehicle diagnosis
message.
message appears.
Features
279
Send
Z