Mercedes-Benz C-Class Operator's Manual page 106

Seats
104
To adjust the upper back support
:
To adjust the contour of the backrest in
;
the lumbar region
To adjust the lateral structure and support
=
of the seat
Make sure that the SmartKey is in position
X
2 in the ignition lock.
i
Repeat the adjustment if the seat no
longer has the desired contour after a
certain amount of time.
Switching the seat heating on/off
Activating/deactivating
G WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high
temperatures may be affected or they may
even suffer burn-like injuries. There is a risk
of injury.
Therefore, do not switch the seat heating on
repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i
If the battery voltage is too low, the seat
heating may switch off.
Driver's and front-passenger seat
The system automatically switches down
from level 3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
Make sure that the SmartKey is in position
X
1 or 2 in the ignition lock.
To switch on: press button : repeatedly
X
until the desired heating level is set.
To switch off: press button : repeatedly
X
until all the indicator lamps go out.