Advertisement
C.
The Basic Setup screen appears. Refer to the settings provided by your ISP.
Select the Encapsulation method your ISP has specified.
D.
For the Multiplexing setting, select LLC or VC.
E.
For the Virtual Circuit, enter the VPI and VCI settings.
F.
Proceed to the appropriate instructions for your Encapsulation method.
NOTE FOR UK RESIDENTS ONLY:
settings unless otherwise instructed by your ISP.
Encapsulation: RFC 2364 PPPoA
Multiplexing: VC
VPI: 0
VCI: 38
RFC 2364 PPPoA or RFC 2516 PPPoE
1.
Enter your Username and Password.
2.
Select Keep Alive if you always
want to be connected to your ISP, or
select Connect on Demand if you
are charged for the time that you
are connected to your ISP.
3.
Click Save Settings.
Select or enter the following
RFC 2364 PPPoA
RFC 2364 PPPoA
RFC 2516 PPPoE
RFC 2516 PPPoE
Advertisement
