Table of Contents
Advertisement
Linksys
Maintenance
Diagnostic
The device provides a simple online network diagnostic tool to help users
troubleshoot network-related problems . Go to Maintenance > Diagnostic .
The features include DNS Lookup (Domain Name Inquiry Test) and Ping (Packet
Delivery/Reception Test) .
DNS Name Lookup
Choose this option to test connectivity to the DNS server that you specified on
the Configuration > Setup > Network page, or to look up an IP address that you
want to use in the ping test .
Enter a host name – example: www .linksys .com (Do not include a prefix such as
http://) - and click Go . You will see the IP address of the host .
NOTE This feature requires that the router can connect to a valid DNS server .
Please check if your WAN interface can be linked to the Internet .
Ping
This feature informs users of the status quo of the outbound session and allows
users to know if computers are online or not .
On this screen, please enter the host IP that users want to test such as
192 .168 .5 .20 . Press Go to start the test . The result will be displayed on this
screen .
Factory Default
Use the Maintenance > Factory Default page to restore the router to its factory
default settings .
Click Factory Default if you want to restore the router to its factory default
1 .
settings except OpenVPN configuration . When the confirmation message
appears, click OK to continue or click Cancel to abandon .
Click Factory Default including OpenVPN if you also want to restore
2 .
OpenVPN configuration . When the confirmation message appears, click
OK to continue or click Cancel to abandon .
Maintenance
68
68
Advertisement
Table of Contents
