Table of Contents
Advertisement
Rebuldng Vrtual Dsk
Ths topc descrbes the procedure to manually rebuld a degraded vrtual dsk by usng
the Marvell BIOS setup utlty. Ths s applcable to the RAID 1 vrtual dsk.
Important
The rebuld process s both ntated and completed n the Marvell BIOS setup. The Mar-
vell RAID Utlty (MRU), whch runs n as OS envronment, cannot be used to ether nt-
ate, resume, or complete the rebuld process Spare physcal dsks are not supported.
1.
When a vrtual dsk s degraded, the "Status" of a vrtual dsk s changed from Func-
tonal to Degrade.
2.
Replace the faulty physcal dsk wth an dentcal physcal dsk. (Note: If an dent-
cal dsk s unavalable, use a replacement physcal dsk of larger sze or one wth
a slghtly smaller sze as determned the Ggabyte Roundng settng for the vrtual
dsk.) The BIOS detects the new physcal dsk and lsts the devce under "Free
Physcal Dsks" n the [Topology] pane.
3.
In the [Topology] pane, scroll to "Vrtual Dsk" (VD 0: XXXX), and press Enter to
select. A menu pops-up as shown below. Scroll to "Rebuld" and press Enter to
configure the rebuld process.
Topology
HBA 0: Marvell 0
Vrtual Dsks
VD 0: MRAID1
PD 8: ST3750330MS
Free Physcal Dsks
PD 0: ST3750XXX
4.
Scroll through the lst of free dsks, and press Space to select a replacement phys-
cal dsk. Press Enter to contnue.
5.
Press Y to confirm the request when prompted Do you want to rebuld wth selected
physcal dsk on ths vd?.
6.
The status of the rebuld process s reflected n the propertes of the vrtual dsk.
Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.
Informaton
ID
Namd
Status
Strpe Sze
[Delete]
RAID Mode
[Rebuld]
Sze
BGA Status
Number of PDs
Members
: 0
: MRAID1
:
Degrade
: 64K
: RAID1
: 953344MB
: N/A
: 2
: 0 8
MS-7670
MS-7670
C-7
Advertisement
Table of Contents
