Table of Contents
Advertisement
Marvell RAID
Marvell RAID
Installng the RAID Drver (for bootable RAID Array)
Important
Only when you set the "AHCI" mode n Integrated Perpherals menu (the default s
IDE mode) of manboard BIOS setup, you have to nstall the RAID Drver for the SATA
devces.
1.
After you complete the RAID BIOS setup, boot from the Wndows CD, and the Wn-
dows Setup program starts.
2.
Press F6 and wat for the Wndows Setup screen to appear.
3.
Insert the floppy that contans the RAID drver, press the "S" key to select "Specfy
Addtonal Devce".
Note: for Wndows Vsta/ Wndows 7, you can copy the files to a medum (floppy/
CD/ DVD or USB)
Important
Please follow the nstructon below to make a SATA RAID drver for yourself.
•
Insert the MSI DVD nto the DVD-ROM drve.
•
Clck the "Browse CD" on the Setup screen.
Copy all the contents n the : \\Storage\Marvell 9128\SCSI mnport drver\Floppy32 or
•
\\Storage\Marvell 9128\SCSI mnport drver\Floppy64
•
The drver dsk for RAID controller s done.
4.
When prompted, nsert the medum dsk and press Enter.
For Wndows Vsta/ Wndows 7:
Durng the Operatng system nstallaton, after selectng the locaton to nstall Vsta/
Wndows 7 clck on "Load Drver" button to load RAID drve.
5.
You should be shown a lst of avalable RAID controller(s).
6.
Select the compatble RAID controller for 32-bt/ 64-bt verson system and then
press ENTER.
7.
The next screen should confirm that you have selected the RAID controller. Press
ENTER agan to contnue.
8.
You have successfully nstalled the RAID drver, and Wndows setup should con-
tnue.
9.
Leave the medum untl the system reboots tself. Wndows setup wll need to copy
the files from the medum agan after the RAID volume s formatted, and Wndows
setup starts copyng files.
C-8
Advertisement
Table of Contents
