Table of Contents
Advertisement
Hardware Setup
Hardware Setup
Fan Power Connectors: CPUFAN1, SYSFAN1~7
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
Please refer to the recommended CPU fans at processor's offical webste or consult
•
the vendors for proper CPU coolng fan.
•
CPUFAN1 and SYSFAN5 support Smart fan control. You can nstall Control Center
utlty that wll automatcally control the speeds accordng to the actual temperatures.
•
Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN1 and
SYSFAN5.
DLED3 Connector: JDLED3
Ths s reserved for connectng the ms future control card.
2-14
SYSFAN1/ 2/ 3/ 4/ 6/ 7
SYSFAN5
Advertisement
Table of Contents
