Linksys WRT300N Quick Installation Manual page 8

J
Wide Channel. If you selected
Wide - 40MHz Channel for the
Radio Band setting, then this
setting will be available for your
primary Wireless-N channel.
Select any channel from the
drop-down menu.
K
Standard Channel. Select the
channel for Wireless-N, -G, and
-B networking. If you selected
Wide – 40MHz Channel for the
Radio Band setting, then the
Standard Channel will be a
secondary channel for
Wireless-N. If you are not sure
which channel to select, keep
the default, Auto.
L
Wireless SSID Broadcast. When
wireless clients survey the local
area for wireless networks to
associate with, they will detect
the SSID broadcast by the
Router. To broadcast the
Router's SSID, keep the default,
Enabled. If you do not want to
broadcast the Router's SSID,
then select Disabled.
M
Change these settings as
described here and click the
Save Settings button to apply
your changes.
N
Power your broadband
modem off and back on
again.
8