Linksys WRT300N Quick Installation Manual page 7

G
Select the Network Mode.
Mixed: If your network has
Wireless-N, -G, and -B devices,
then keep the default setting,
Mixed.
Disable: To disable wireless
networking, select Disable.
H
Network Name (SSID). The SSID
is the network name shared by
all devices in a wireless
network. It is case-sensitive and
must not have more than 32
characters (use any keyboard
character). For added security,
change the default SSID
(linksys) to a unique name.
I
Radio Band. For best
performance in a network
using Wireless-N, -G and -B
devices, keep the default,
Wide - 40MHz Channel. For
Wireless-G and Wireless-B
networking only, select
Standard - 20MHz Channel.
G
If you select Wide -
IMPORTANT:
40MHz Channel for the Radio
Band setting, then Wireless-N
can use two channels: a primary
one (Wide Channel) and a
secondary one (Standard
Channel). This will enhance
Wireless-N performance.
7