Wep Security Settings - Linksys WRT300N Quick Installation Manual

WEP
Encryption - Select the level of
encryption you want to use,
40/64 bit (10 hex digits) or
128 bit (26 hex digits).
Passphrase - To automatically
generate WEP keys, enter a
passphrase and then click
Generate.
Key 1-4 - To manually enter
WEP keys, complete these
fields. For 64-bit encryption, a
WEP key should have exactly
10 hexadecimal characters.
For 128-bit encryption, a WEP
key should have exactly
26 hexadecimal characters.
Valid hexadecimal characters
are "0" to "9" and "A" to "F".
TX Key - Select a default TX
(transmit) Key to use. In most
cases, you can keep the
default, 1.
D
Click the Save Settings button.
Congratulations! Wireless security is
now configured on the Router.

WEP Security Settings

For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Product Registration
http://www.linksys.com/registration
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
WRT300N-EU-LA-UK-QIG-PSK-60406NC JL
11