The Protocol Tab - Netbeui; Figure 6-5: Protocol Tab - Netbeui - Linksys WPS54GU2 User Manual

Wireless-G PrintServer for USB 2.0

The Protocol Tab - NetBEUI

NetBEUI connection settings of the PrintServer are available on this tab. (See Figure 6-5.)
Domain Name. Enter the name of the domain that you want the PrintServer associated with in the Domain Name
field.
If you are unsure of the Domain Name, you can find it out by looking on any computer already on the network. In
Windows 98, right-click Network Neighborhood and select Properties. Under the Identification tab, there will be
listed that computer's name, and the Domain to which it is connected. For Windows Me, 2000, or XP, right-click My

Figure 6-5: Protocol Tab - NetBEUI

Network Places. In Windows Me, choose Properties from the menu that appears. In Windows 2000 or XP, choose
Properties from the menu that appears. Then, right-click Local Area Connection and choose Properties. The
Domain name will appear. If you want the PrintServer to be connected to that same Domain, enter that Domain
name here. If no Domain name exists there, you will use the Workgroup name from that window.
Options. You can specify the Response Time that you prefer for the PrintServer. This is the amount of time
(measured in seconds) that the PrintServer will wait for a response from the network before "timing out."
You also have the option to use this feature, Abort Print Job if Error. Selecting Yes here will terminate the printing if
there is an error of any kind. If you select No, print jobs that have errors will be sent to the printer, but might not
print properly.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Chapter 6: Configuring the PrintServer Using the Web-based Utility 20
The Protocol Tab - NetBEUI